Citizen CT-D150, Command Reference Manual

Page: 98 / 512

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281 CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
CT-D151/E651
- 97 -
ESC T n
[Function] Selecting the character printing direction in PAGE MODE
[Code] <1B>H<54>H<n>
[Range] 0
≤n≤3, 48≤n≤51
[Outline] [The specification which is common to the model]
• Selects the direction and start point of character printing in PAGE MODE.
n Printing Direction Start Point
0, 48
Left to right Top left (“A” in the figure)
1, 49
Bottom to top Bottom left (“B” in the figure)
2, 50
Right to left Bottom right (“C” in the figure)
3, 51
Top to bottom Top right (“D” in the figure)
[Caution] [The specification which is common to the model]
• When STANDARD MODE is selected, this command only executes the internal flagging of the
printer without affecting the printing in STANDARD MODE.
• The character mapping position will be the start point of the print area specified by ESC W.
• The basic calculation pitch (x or y) used by the following commands varies with the start point.
(1) If the start point is the top left or bottom right (The characters are mapped in the direction perpendicular to
the paper feed),
• Commands using x: ESC SP, ESC S, ESC \
• Commands using y: ESC 3, ESC J, GS $, GS \
(2) If the start point is the top right or bottom left (The characters are mapped in the paper feed direction),
• Commands using x: ESC 3, ESC J, GS $, GS \
• Commands using y: ESC SP, ESC S, ESC \
[Default] n=0
[See Also] Appendix 5.1 “Explanation on PAGE MODE”
ESC $ , ESC L , ESC W , ESC \ , GS $ , GS P , GS \
A
Paper feed direction
D
B