- 482 -
4.2.7 MSW7
●
MSW7-1
:
Baud rate
[Outline]
Selects the baud rate which is serial interface communication condition.
Enabled if DSW1-1 OFF is set [following memory switch setting] .
Setting Value
Baud Rate
1200bps,2400bps,4800bps,9600bps,19200bps,
38400bps,57600bps,115200bps
●
MSW7-2
:
Data length
[Outline]
Selects the data length, which is a serial interface communication condition.
Enabled if DSW1-1 OFF is set [following memory switch setting] .
Setting Value
Data Length
7bits,8bits
●
MSW7-3
:
Stop bit
[Outline]
Selects the stop bit, which is a serial interface communication condition.
Enabled if DSW1-1 OFF is set [following memory switch setting] .
Setting Value
Stop Bit
1bit,2bits
●
MSW7-4
:
Parity
[Outline]
Selects the parity, which is a serial interface communication condition.
Enabled if DSW1-1 OFF is set [following memory switch setting] .
Setting Value
Parity
NONE, ODD, EVEN
●
MSW7-5
:
Flow control
[Outline]
Selects the flow control, which is a serial interface communication condition.
Enabled if DSW1-1 OFF is set [following memory switch setting] .
Setting Value
Flow Control
DTR/DSR, XON/XOFF
