Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 394 -
GS I n
[Function]
Sending the printer ID
[Code]
<1D>H<49>H<n>
[Range]
CT-S280
/
CT-S601(II)
/
CT-S651(II)
/
CT-P29x series
/
CT-S310II
/
CT-S251
/
CT-D150
/
CT-E351
/
CT-D151
/
CT-E651
1≤n≤3, 49≤n≤51, 65≤n≤67, n=69, 112
CT-S281
/
CT-S300
/
CT-S310
/
CT-S2000
/
CT-S4000
/
CT-S801(II)
/
CT-S851(II)
1≤n≤4, 49≤n≤52, 65≤n≤67, n=69, 112
CT-S281
• Only Bluetooth model
90
≦
n
≦
92
、
n
＝
94
、
99
CT-S801II
/
CT-S851II
/
CT-S601II
/
CT-S651II
/
CT-S251
/
CT-D151
/
CT-E651
• Only Bluetooth I/F
90
≦
n
≦
92
、
n
＝
94
、
99
、
101
≦
n
≦
106
[Outline]
[The specification which is common to the model]
• Sends the specified printer ID.
[Caution]
[The specification which is common to the model]
• Under DTR/DSR control, the printer sends the printer ID after verifying that the host is ready to
receive.
• If the host is not ready to receive, the printer waits for the host to become ready to receive.
• Under XON/XOFF control, the printer sends the printer ID without checking whether or not the host is ready
to receive.
• Because this command is executed when data is mapped in the receive buffer, there may be a delay
between command receiving and printer ID sending depending on the condition of the receive buffer.
• If ASB (Automatic Status Back) is enabled by GS a, the host must discriminate between the printer ID due to
this command and the status due to ASB.
[The specification which depend on the model]
CT-S281
/
CT-S300
/
CT-S310
/
CT-S2000
/
CT-S4000
/
CT-S801(II)
/
CT-S851(II)
• Sending the Black mark length is valid only when Black mark paper is selected.
