Citizen CT-D150, Command Reference Manual

Page: 388 / 512

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281 CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
CT-D151/E651
- 387 -
ESC = n
[Function] Data input control
[Code] <1B>H<3D>H<n>
[Range] 0
≤n≤255
[Outline] [The specification which is common to the model]
• Selecting equipment for which data input from the host is valid.
• Each bit of “n” indicates as follows.
• When the printer has not been selected, this printer abandons all the received data until it is selected by this
command.
Bit Equipment
Value
0 1
0
Printer Invalid Valid
1
Not defined — —
2
Not defined — —
3
Not defined — —
4
Not defined — —
5
Not defined — —
6
Not defined — —
7
Not defined — —
[Caution] [The specification which is common to the model]
• Even when the printer has not been selected, it can become BUSY state through printer
operation.
• When the printer is deselected, this printer discards all the data until it is selected with this command. (Except
DLE EOT, DLE ENQ, and DLE DC4)
[Default] n=1