Citizen CT-D150, Command Reference Manual

Page: 183 / 512

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281 CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
CT-D151/E651
- 182 -
2.2.14 Kanji Control Commands
FS ! n
[Function] Collectively setting Kanji print mode
[Code] <1C>H<21>H<n>
[Range] 0
≤n≤255
[Outline] [The specification which is common to the model]
• Collectively sets Kanji print mode.
• Each bit of “n” has the following meaning:
Bit Function
Value
0 1
0 Undefined - -
1 Undefined - -
2 Double-width enlargement Canceled Specified
3 Double-height enlargement Canceled Specified
4 Undefined - -
5 Undefined - -
6 Undefined - -
7 Underline Canceled Specified
[Caution] [The specification which is common to the model]
• Setting both double-height and double-width enlargement causes four times enlargement.
• Underline is applied to all width of printed characters but not to the part skipped by HT. Underline is not applied
to the character rotated by 90° clockwise.
• Thickness of underline is the value set by FS – (defaulted to 1 dot width).
[Default] n=0
[See Also] FS - , FS W , GS !