Citizen CT-801II Series Programming Manual Download Page 103

Page: 103 / 114

103

CITIZEN UWP POS Print SDK - Programming Manual

4.3.

Library interfaces

The followings are the interfaces of this SDK.

4.3.1. Return value

Methods to be described later return the value in the list below.

Return value

Description

CSC_SUCCESS (0)

The operation is success.

CSC_E_CONNECTED (1001)

The device is already connected.

CSC_E_DISCONNECT (1002)

The device is not connected.

CSC_E_NOTCONNECT (1003)

Failed connection to the device.

CSC_E_CONNECT_NOTFOUND (1004)

Failed to check the support model after connecting to the device.

CSC_E_CONNECT_OFFLINE (1005)

Failed to check the printer status after connecting to the device.

CSC_E_ILLEGAL (1101)

Unsupported operation with the Device, or an invalid parameter value was
used.

CSC_E_OFFLINE (1102)

The printer is off-line.

CSC_E_NOEXIST (1103)

The file name does not exist.

CSC_E_FAILURE (1104)

The Service cannot perform the requested procedure.

Summary of Contents for CT-801II Series



















































































































Search results

Summary of Contents for CT-801II Series

Reviews:

Related manuals for CT-801II Series

Brands by name

Popular brands

Citizen CT-801II Series, Programming Manual

Search results

Summary of Contents for CT-801II Series

Reviews:

Related manuals for CT-801II Series

Brands by name

Popular brands