Citizen CL-E720DT, Technical Manual

Page: 63 / 189

Chapter 2 Operating Principles
2-3.
Operation Panel
2-49
CL-E720DT
Submenu Name
[Factory Mode Settings
Menu name]
Adjustable Value
(Default Value)
Description
DT Cold HeatRat
[DT Cold HeatRate Adjust] -1.0 to +1.0%
(0.0%)
Adjusts the head temperature compensation
coefficient for the head temperature less than
25

C (77

F).
To increase the print darkness, increase the
value.
PwrOn Head Chk
[PowerOn Head Check] On/Off
(On) Selects whether to perform head check at power
ON or not.
Head Chk Start
[Head Check Start Pos.] Dots 001 to 848
(Dot 001) Designates the start dot for head check.
Head Chk Stop
[Head Check Stop Pos.] Dots 001 to 848
(Dot 848) Designates the end dot for head check.
Parallel ErrOut
[Parallel Error Output] On/Off
(On) Select whether to activate the Fault signal of
parallel interface at the time of error occurrence
or not.
USB Serial Num
[USB Serial Number] On/Off
(Off) Select whether to send the serial number to the
host or not, when operating the printer through
the USB interface.
Auto Exec Prn
[Auto Exec Print] On/Off
(On) To execute the Auto Exec file stored in the
printer at power ON or not is selectable.
Config Print
[Config Print Layout] Standard/
Reversed
(Standard) Print layout type can be selected.
Standard: Prints setting items on the left and set
values on the right.
Reversed: Prints set values on the left and
setting items on the right.
Head Clean Msg
[Head Clean Message] 0 to 9999999
(0000000m) Designates the length where a head cleaning
message is to be printed.
Print Prefer
[Printer Preference] Darkness/Speed
(Darkness) To put the priority on printing density or printing
speed is selectable.