81
—
—
8. Online Configuration Mode
1. Press and hold the FEED key for at least 3 seconds while the printer is online and not
receiving data.
The printer is now in online configuration mode.
The buzzer emits 3 short tones and the status LED flashes alternately in green and red.
2. Press the FEED key to select media sensor mode.
Media sensor mode
Buzzer
Status LED
Color
Interval
Transmissive sensor mode
1 short tones
Green
Flashes
Press the FEED
key
↓
Reflective sensor mode
2 short tones
Green
Flashes quickly
Press the FEED
key
↓
Continuous media mode
3 short tones
Amber
Flashes
Press the FEED
key
↓
Thermal-transfer printing
mode
4 short tones
Amber
Flashes quickly
Press the FEED
key
↓
Direct-thermal printing
mode
5 short tones
Red
Flashes
Press the FEED
key
↓
Returns to the transmissive sensor mode.
3. Press and hold the FEED key for at least 3 seconds.
4. Release the FEED key once the buzzer emits a long tone.
The selected media sensor mode is set.
To cancel online configuration mode, continue pressing and holding the FEED key for
at least 3 seconds without releasing your finger at step 4.
The buzzer emits 4 short tones, and the printer restarts.
Summary of Contents for CL-E321
