70
—
—
7. Configuring the Printer Using the
Operation Panel
The following operations can be performed from the control panel after changing the
printer operation mode to the special mode.
Adjust media sensors
Print test samples
Print the settings configuration
Change emulation modes
HEX dump mode
Initialize the printer
*This device is not equipped with the [Menu Configuration Mode] featured in other
models.
1. With the top cover closed, turn on the power to the printer while pressing and holding
the FEED key.
The printer changes to the special mode.
The buzzer emits 3 short tones and the status LED flashes alternately in green and red.
2. Press the FEED key to select the desired operation mode.
Mode
Buzzer
Status LED
Color
Interval
Special function mode
3 short tones
Alternately in green and
red
Flashes quickly
Press the FEED
key
↓
Sensor Adjustment Mode
1 short tones
Green
Flashes
Press the FEED
key
↓
Test print mode
2 short tones
Green
Flashes quickly
Press the FEED
key
↓
Configuration print mode
3 short tones
Amber
Flashes
Press the FEED
key
↓
Summary of Contents for CL-E321
