19
Rear Connectors
1
Interface connector
It is connected to either a serial (RS232C) or parallel (IEEE1284) interface cable.
* A USB interface replaced by a serial or parallel interface will be available as a factory
option.
2
Drawer kick connector
It is connected to a cable from the drawer.
3
Power source connector
It is connected to a cable from the AC adapter.
4
Power source inlet
It is connected to the power cord.
Others
Built-in Buzzer
A buzzer sounds when the FEED switch is operated and when there is an error.
The buzzer can be switched between enabled and disabled in Soft SW setting mode.
User Memory
Logo data or text data prepared by the user can be stored in memory.
This stored data remains in memory even after the power is turned off.
Name
s and F
unc
tions of P
ar
ts
AC adapter type
1
2
3
4
Serial (RS232C) interface
Parallel (IEEE1284) interface
Built-in AC adapter type
Summary of Contents for CD-S500 series
Page 1: ...CD S500 Series CD S500a User s Manual DOT MATRIX PRINTER ...
Page 51: ......