show netio idb
To display network input and output (Netio) interface descriptor block (IDB) information for an interface,
use the
show netio idb
command in EXEC mode.
show netio idb
{
interface-type interface-instance
} [
location node-id
]
Syntax Description
Interface type. For more information, use the question mark (?) online help function.
interface-type
Either a physical interface instance or a virtual interface instance as follows:
•
Physical interface instance. Naming notation is
rack/slot/module/port
and a slash
between values is required as part of the notation.
◦
rack
: Chassis number of the rack.
◦
slot
: Physical slot number of the modular services card or line card.
◦
module
: Module number. A physical layer interface module (PLIM) is always
0.
◦
port
: Physical port number of the interface.
In references to a Management Ethernet interface located on a route
processor card, the physical slot number is alphanumeric (RP0 or RP1)
and the module is CPU0. Example: interface MgmtEth0/RP1/CPU0/0.
Note
•
Virtual interface instance. Number range varies depending on interface type.
For more information about the syntax for the router, use the question mark (?) online
help function.
interface-instance
(Optional) Displays Netio IDB information for a specified node. The
node-id
argument
is entered in the
rack/slot/module
notation.
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Modification
Release
This command was introduced.
Release 3.2
Changed the
interface-type interface-instance
arguments to
required ones.
Release 3.8.0
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
60
OL-30353-01
Troubleshooting Commands
show netio idb