Cisco XR 12000 Reference Download Page 51

Page: 51 / 428

show captured packets

To display information on packets that are switched and punted in the software, use the

show captured

packets

command in EXEC mode.

show captured packets

{

ingress| egress

} [

interface type interface-path-id

]

[hexdump]

[

last number

]

[single-line] location node-id

Syntax Description

Specifies ingress dropped packets.

ingress

Specifies egress dropped packets.

egress

(Optional) Specifies an interface.

interface

(Optional) Interface type. For more information, use the question mark (?)
online help function.

type

(Optional) Physical interface or virtual interface.

Use the

show interfaces

command to see a list of all interfaces

currently configured on the router.

Note

For more information about the syntax for the router, use the question mark (

) online help function.

interface-path-id

(Optional) Displays the packet contents in hex.

hexdump

(Optional) Specifies the last number of packets in the queue to display.

last number

(Optional) Displays a one-line summary of the captured packets to facilitate
the use of the include and exclude operators.

single-line

(Optional) Displays packet information for a specified node. The

node-id

argument is entered in the

rack/slot/module

notation.

location node-id

Command Default

No default behavior or values

Command Modes

EXEC

Command History

Modification

Release

This command was introduced.

Release 3.2

Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x

OL-30353-01

Troubleshooting Commands

show captured packets

Summary of Contents for XR 12000













































































































































































































































































































































































































































Search results

Summary of Contents for XR 12000

Reviews:

Cisco XR 12000, Reference, Page: 51 / 428

Search results

Summary of Contents for XR 12000

Reviews: