Cisco XR 12000 Reference Download Page 393

Page: 393 / 428

show critmon statistics

To display information about the critical monitor statistics, use the

show critmon statistics

command in

EXEC mode and in administration EXEC mode.

show critmon statistics

{

all| congestion

deadline client client-name| ticker| watcher

}

last hours location

{

node-id| all

}

Syntax Description

Displays all the information for the critical monitor.

all

Displays all the CPU congestion information for the critical monitor.

congestion

Displays all the statistics information for the deadline monitor.

deadline

Displays information only for the specified client.

client

Name of the client.

client-name

Displays the ticker statistics for the wd-critical-mon process.

ticker

Displays the watcher statistics for the wd-critical-mon process.

watcher

Displays only the last number of hours.

last

Number of last hours. The range is from 1 to 24.

hours

Specifies a node to filter.

location

Node ID. The

node-id

argument is entered in the

rack/slot/module

notation.

node-id

Specifies all locations.

all

Command Default

No default behavior or values

Command Modes

EXEC

Administration EXEC

Command History

Modification

Release

This command was introduced .

Release 3.6.0

Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x

OL-30353-01

385

Watchdog Commands

show critmon statistics

Summary of Contents for XR 12000













































































































































































































































































































































































































































Search results

Summary of Contents for XR 12000

Reviews:

Cisco XR 12000, Reference, Page: 393 / 428

Search results

Summary of Contents for XR 12000

Reviews: