Cisco XR 12000 Reference Download Page 192

Page: 192 / 428

show tech-support chdlc

To automatically run

show

commands that display debugging information related to Cisco high-level data

link control (CHDLC) protocol, use the

show tech-support chdlc

command in the EXEC mode.

show tech-support chdlc file send-to

[

interface| slow

] [

location node-id

]

[rack]

Syntax Description

Specifies that the command output is saved to a specified file.

file

Name of the file. The following valid options are listed:

•

filename

•

bootflash: filename

•

compactflash: filename

•

disk0: filename

•

disk1: filename

•

flash: filename

•

ftp: filename

•

harddisk: filename

•

harddiska: filename

•

nvram: filename

•

rcp: filename

•

slot0: filename

•

slot1: filename

•

tftp: filename

send-to

(Optional) Displays information about a specific interface.

interface

(Optional) Displays the debugging output of chdlc.

slow

(Optional) Specifies a node.

location

(Optional) Node ID. The

node-id

argument is entered in the

rack/slot/module

notation.

node-id

(Optional) Displays a list of racks.

rack

Command Default

None.

Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x

184

OL-30353-01

Tech-Support Commands

show tech-support chdlc

Summary of Contents for XR 12000













































































































































































































































































































































































































































Search results

Summary of Contents for XR 12000

Reviews:

Cisco XR 12000, Reference, Page: 192 / 428

Search results

Summary of Contents for XR 12000

Reviews: