Cisco XR 12000 Reference Download Page 156

Page: 156 / 428

show tech-support asic

To save a snapshot of ASIC information specific to ASIC debugging, use the

show tech-support asic

command in administration EXEC mode.

show tech-support asic

{

} {

directory path

instance instance

directory path

} [

location node-id

]

Syntax Description

ASIC name.

name

Specifies all ASICs.

all

Specifies CPU controller ASICs.

cpuctrl

Specifies fabric queue ASICs.

fabricq

Specifies ingress queue ASICs.

ingressq

Specifies power sourcing equipment ASICs.

pse

Directory to save the ASIC snapshot in.

directory

Path of the directory.

path

Specifies an ASIC instance.

instance

ASIC instance. Range is 0 to 8.

instance

(Optional) Specifies a node.

location

(Optional) Node ID. The

node-id

argument is entered in the

rack/slot/module

notation.

node-id

Command Default

No default behavior or values

Command Modes

Administration EXEC

Command History

Modification

Release

This command was introduced.

Release 3.4.0

Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x

148

OL-30353-01

Tech-Support Commands

show tech-support asic

Summary of Contents for XR 12000













































































































































































































































































































































































































































Search results

Summary of Contents for XR 12000

Reviews:

Cisco XR 12000, Reference, Page: 156 / 428

Search results

Summary of Contents for XR 12000

Reviews: