show tech-support
To automatically run
show
commands that display system information, use the
show tech-support
command
in the EXEC and administration EXEC modes.
show tech-support [password]
{
terminal [page]
|
file send-to [background]
[
compressed| uncompressed
]}
[
location node-id
]
Syntax Description
(Optional) Leaves passwords and other security information in the output. If not
used, passwords and other security-sensitive information in the output are replaced
with the label "<removed>".
password
Displays command output on the terminal.
terminal
(Optional) Displays the command output on a single page at a time. Use the Return
key to display the next line of output or use the space bar to display the next page
of information. If not used, the output scrolls (that is, it does not stop for page
breaks).
Press the
Ctrl-C
keys to stop the command output.
page
Specifies that the command output is saved to a specified file.
file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
compactflash: filename
•
disk0: filename
•
disk1: filename
•
flash: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
nvram: filename
•
rcp: filename
•
slot0: filename
•
slot1: filename
•
tftp: filename
send-to
(Optional) Specifies that the command runs in the background.
background
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01
131
Tech-Support Commands
show tech-support