Cisco XR 1200 series Command Reference Manual Download Page 117

Page: 117 / 432

show event manager refresh-time

To display the time between the user authentication refreshes in the Embedded Event Manager (EEM), use
the

show event manager refresh-time

command in EXEC mode.

show event manager refresh-time

Syntax Description

This command has no keywords or arguments.

Command Default

None

Command Modes

EXEC

Command History

Modification

Release

This command was introduced.

Release 3.3.0

The

show fault manager refresh-time

command was replaced with

the

show event manager refresh-time

command.

Release 3.6.0

Task ID was changed from fault-mgr to eem.

Release 3.7.0

Usage Guidelines

The output of the

show event manager refresh-time

command is the refresh time, in seconds.

Task ID

Operations

Task ID

read

eem

Examples

This is a sample output of the

show event manager refresh-time

command:

RP/0/0/CPU0:router#

show event manager refresh-time

Output:
1800 seconds

Related Commands

Description

Command

Specifies the time between the system attempts to
contact the AAA server, and refreshes the username
reauthentication.

event manager refresh-time, on page 85

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

OL-24735-01

105

Embedded Event Manager Commands

show event manager refresh-time

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands