Cisco XR 1200 series Command Reference Manual Download Page 106

Page: 106 / 432

show event manager metric hardware

To display the Embedded Event Manager (EEM) reliability data for the processes running on a particular
node, use the

show event manager metric hardware

command in EXEC mode.

show event manager metric hardware location

{

node-id| all

}

Syntax Description

Specifies the location of the node.

location

EEM reliability data for the specified node. The

node-id

argument is entered

in the

rack/slot/module

notation.

node-id

Specifies all the nodes.

all

Command Default

None

Command Modes

EXEC

Command History

Modification

Release

This command was introduced.

Release 3.2

The

show fault manager metric hardware

command was replaced

with the

show event manager metric environment

command.

Release 3.6.0

Usage Guidelines

Task ID

Operations

Task ID

read

eem

Examples

This is a sample output of the

show event manager metric hardware

command:

RP/0/0/CPU0:router#

show event manager metric hardware location 0/

/CPU0

=====================================

node: 0/0/CPU0

Most recent online: Mon Sep 10 21:45:02 2007
Number of times online: 1
Cumulative time online: 0 days, 09:01:07

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

OL-24735-01

Embedded Event Manager Commands

show event manager metric hardware

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands