manualshive.com logo in svg

Cisco WRT300N, User Manual, Page: 52 / 92

Share
Download
Cisco WRT300N User Manual Download Page 52

45

Chapter 5: Configuring the Wireless-N Broadband Router
The Administration Tab - Factory Defaults

Wireless-N Broadband Router

The Administration Tab - Factory Defaults

The 

Factory Defaults

 screen allows you to restore the Router’s configuration to its factory default settings.

Factory Defaults

Restore All Settings

. To clear all of the Router’s settings and reset them to their factory defaults, click the 

Restore All Settings 

button.

Restore Wireless Settings

. To clear all of the Router’s Wireless settings and reset them to their factory defaults, 

click the 

Restore Wireless Settings 

button.

Help information is shown on the right-hand side of the screen.

Figure 5-47: Administration Tab - Factory Defaults

NOTE:

Do not restore the factory defaults unless you are having difficulties with the Router and 

have exhausted all other troubleshooting measures. Once the Router is reset, you will have to re-
enter all of your configuration settings.

Summary of Contents for WRT300N





























































































Reviews:

No comments