manualshive.com logo in svg

Cisco Webex DX70, Administrator'S Manual

The Cisco Webex DX70 is an innovative video conferencing device designed for seamless collaboration. To navigate its features and maximize its potential, users can easily access the comprehensive User Manual available for free download from our website. Unlock the full potential of Cisco Webex DX70 with our user-friendly manual.

Share
Download
background image

D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.  

www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved. 

68

Cisco Webex DX70 and DX80

 Administrator Guide

Set up ad hoc multipoint conferences

There are several ways to expand a point-to-point video call (a 

call involving only two parties) into a multipoint conference with 

more participants.

Centralized conference infrastructure

Most solutions are based on a centralized conference 

infrastructure, i.e. an MCU (multipoint control unit) 

1

.

Video 

device

B

Video 

device

C

Video 

device

A

Video 

device

D

MCU

In this set-up video devices A, B, C and D participates in a 4-party 

conference. The MCU receives media streams from all the 

devices, processes the streams, and sends all media to the other 

participants. 

(page 1 of 2)

Local conference resources - MultiSite  

(not available for SX10, DX70, and DX80)

In a MultiSite scenario, one of the video devices has MCU 

functionality. 

Video 

device

B

Video 

device

D

Video 

device w/

MultiSite

A

Video 

device

C

In this set-up video devices A, B, C and D participates in a 

4-party conference. Device A uses its MultiSite functionality 

and acts as an MCU. It receives media streams from all the 

devices, processes the streams, and sends all media to the other 

participants. 

MultiSite is not part of the standard product delivery; you must 

buy an upgrade option to get the 

MultiSite option key

 installed on 

the device.

The maximum number of participants supported by MultiSite is:

•  SX10, DX70, and DX80: No MultiSite support
•  SX80, MX700, and MX800: Five participants (yourself 

included) plus one additional audio call

•  Codec Pro, Room 70 G2, Room Panorama, Room 70 

Panorama, Desk Pro: Five participants (yourself included)

•  Other products: Four participants (yourself included)

1

  MCU - multipoint control unit, also called video-conferencing gateway or bridge.

Multipoint configuration

Use the

 Conference > Multipoint > Mode

 

setting to decide how to handle multipoint 

conferences. This setting takes the 

following values:

•  Auto
•  CUCMMediaResourceGroupList
•  MultiSite 

(not available for SX10, 

DX70, DX80)

•  Off 

(not available for SX10, DX70, 

DX80)

The table on the next page explains the 

different conferencing options.

Introduction

Configuration

Peripherals

Maintenance

Device settings

Appendices

Appendices

Summary of Contents for Webex DX70




























































































































































































































Reviews:

No comments

Related manuals for Webex DX70

Danfoss ECL Comfort 110 Mounting Manual preview
ECL Comfort 110
Brand: Danfoss Pages: 8
Danfoss AFQM Operating Manual preview
AFQM
Brand: Danfoss Pages: 16
Xantrex Freedom e-GEN Checklist preview
Freedom e-GEN
Brand: Xantrex Pages: 4
Xantrex AGS Owner'S Manual preview
AGS
Brand: Xantrex Pages: 20
Vestil BOL-R Series Instruction Manual preview
BOL-R Series
Brand: Vestil Pages: 6
ORTAL Heat Control System Installation And Operation Manual preview
Heat Control System
Brand: ORTAL Pages: 20
J&M Integratr IV Installation And Operation Instructions Manual preview
Integratr IV
Brand: J&M Pages: 8
Daewoo AXW-117 Service Manual preview
AXW-117
Brand: Daewoo Pages: 35
Autotrol 460i Operation And Maintenance Manual preview
460i
Brand: Autotrol Pages: 8
Yealink MVC940 Quick Start Manual preview
MVC940
Brand: Yealink Pages: 36
Delphi 10034 - Sa Skyfi Cd Audio System Owner'S Manual preview
10034 - Sa Skyfi Cd Audio System
Brand: Delphi Pages: 19
Digital Flash Memory MP3 On-Hold User Manual preview
MP3 On-Hold
Brand: Digital Flash Memory Pages: 10
Bigben THOMSON DS120CD Operating Instructions Manual preview
THOMSON DS120CD
Brand: Bigben Pages: 76
Inovalley Retro 03 Manual preview
Retro 03
Brand: Inovalley Pages: 12
New Rock Technologies WROC2000 User Manual preview
WROC2000
Brand: New Rock Technologies Pages: 71
Technika MC-229I Owner'S Handbook Manual preview
MC-229I
Brand: Technika Pages: 16
NEC ASPILA EX Feature Manual preview
ASPILA EX
Brand: NEC Pages: 1098
ClearOne COLLABORATE Live 300 Quick Start Manual preview
COLLABORATE Live 300
Brand: ClearOne Pages: 8

Brands by name

Popular brands

Load more brands