Procedure
Step 1
Press and hold the
Power
button until the phone vibrates and the first screen displays.
Step 2
On the startup screen, quickly tap the display 6 times.
Step 3
Scan a QR code.
Related Topics
, on page 83
Manual Phone Configuration
If you don't use an Enterprise Mobility Management (EMM) application and QR code to configure the phones,
you can manually configure the phones.
Wi-Fi Profile Configuration
For an out of box or factory reset phone, you configure the Wi-Fi network through the startup wizard or select
Set up offline
. How you configure the phone offline depends on whether the Wi-Fi network is either:
• Broadcasted
• Nonbroadcast or hidden
Add the Phone to a Broadcasted Wi-Fi Network
You add the phone to a broadcasted Wi-Fi network through the startup wizard, or offline through the
Settings
app.
Before you begin
Get the following information about the Wi-Fi network from your administrator:
• Network name or Service Set Identifier (SSID)
• Network security mode:
• None
• Pre-shared key (PSK)
• Protected Extensible Authentication Protocol (PEAP)
• Extensible Authentication Protocol (EAP) Transport Layer Security (EAP-TLS)
• EAP Tunneled Transport Layer Security (EAP-TTLS)
• PIN or passkey for the security mode, if you use one
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
58
Phone Configuration
Manual Phone Configuration
