Cisco Webex 800 Series User Manual Download Page 32

Page: 32 / 130

If desired, you can change the navigation control through

Settings

System

Gestures

System navigation

Note

Table 12: Gesture Navigation Control for the Cisco Webex Wireless Phone 840

Action

If you want to...

From the bottom of the screen, swipe up.

Return to the Home screen from any
app.

From the bottom of the screen, swipe up one quarter of the screen
and pause.

Swipe right and left to view all open apps.

Tap an app to go to it, swipe up on an app to close it, or tap

Clear all

to close all apps.

View all open apps.

Table 13: 3-button Navigation Control for the Cisco Webex Wireless Phone 860

Action

If you want to...

Tap

Back

Go back to the previous screen or app.

Tap

Home

Return to the Home screen from any app.

Tap

Recent apps

Swipe right and left to view all open apps.

Tap an app to go to it, swipe up on an app to close it, or tap

Clear

all

to close all apps.

View all open apps.

Software Updates

Unlike consumer-grade Android phones, your system administrator manages software updates of both the
phone version and of the apps.

• If the administrator sees that your phone software is out of date, they may be able to force an update. A

forced update closes all active applications and reboots the phone.

• If the administrator updates an app version, you may notice that app features change without warning.

These changes in the app occur because only one version of an app can run at a time.

Apply Software Updates

Periodically, your phone connects to a server and downloads an available software update. If your system
administrator does not set your phone to automatically reboot after a software update, you receive a notification

Cisco Webex Wireless Phone 800 Series User Guide

Your Phone

Software Updates

Summary of Contents for Webex 800 Series



































































































































Search results

Summary of Contents for Webex 800 Series

Reviews:

Related manuals for Webex 800 Series

Brands by name

Popular brands

Cisco Webex 800 Series, User Manual

Search results

Summary of Contents for Webex 800 Series

Reviews:

Related manuals for Webex 800 Series

Brands by name

Popular brands