Cisco Webex 800 Series User Manual Download Page 110

Page: 110 / 130

You cannot use this charger for 840 batteries.

Caution

There are two LEDs: one for each battery. The LEDs turn on when you properly seat the batteries.

• A solid red LED indicates that the item is charging.

• A solid green LED indicates that the item is fully charged.

• An LED that is off indicates an empty slot or an error condition.

Before you begin

Ensure that you properly set up the Cisco Webex Wireless Phone 860 Desktop Battery Charger Module.

Procedure

With the battery charging contacts facing down, insert a spare battery into each charger slot.

Multichargers

The following multichargers are compatible with your phone.

However, the multichargers for the Cisco Webex Wireless Phone 840 and Cisco Webex Wireless Phone 860
are not interchangeable.

Cisco Webex Wireless Phone 840 and 840S

The Cisco Webex Wireless Phone 840 and 840S have two standalone multichargers:

Table 23: Multichargers

Charger
Capacity

Charger Name

Six 840 phones

Cisco Webex Wireless Phone 840 Multicharger

Cisco Webex Wireless Phone 800 Series User Guide

100

Accessories

Multichargers

Summary of Contents for Webex 800 Series



































































































































Search results

Summary of Contents for Webex 800 Series

Reviews:

Related manuals for Webex 800 Series

Brands by name

Popular brands

Cisco Webex 800 Series, User Manual

Search results

Summary of Contents for Webex 800 Series

Reviews:

Related manuals for Webex 800 Series

Brands by name

Popular brands