The following message is displayed at the end of the boot-up messages:
Example:
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:
Step 3
Enter
no
to proceed with manual configuration using the CLI:
Example:
Would you like to enter the initial configuration dialog? [yes/no]:
no
Would you like to terminate autoinstall? [yes]
Step 4
Press Return to terminate autoinstall and continue with manual configuration.
Several messages are displayed, ending with a line similar to the following:
Example:
...
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled <
date
> <
time
> by <
person
>
Step 5
Press Return to bring up the Router> prompt:
Example:
...
flashfs[4]: Initialization complete.
Router>
Step 6
Enter privileged EXEC mode:
Example:
Router>
enable
Router#
Step 7
Continue with the
Troubleshooting
section.
If the rommon 1> prompt appears, your system has booted in ROM monitor mode. For information on the
ROM monitor, refer to the router rebooting and ROM monitor information in the
Cisco IOS Configuration
Fundamentals Configuration Guide
for your Cisco IOS software release.
Note
Installing the Cisco VG450 Voice Gateway
12
Installing the Cisco VG450 Voice Gateway
Power-On Procedure
