Cisco Unified IP Phone 8941 Administration Manual Download Page 53

Page: 53 / 208

Set DNS Server Fields

Procedure

Step 1

Set the DHCP Enabled option to

Step 2

Scroll to the appropriate DNS Server option, press

Select

, and enter a new DNS server IP address.

Step 3

Press

Apply

Step 4

If multiple DNS Servers can be configured, repeat Steps 2 and 3 as needed to assign backup DNS servers.

Set Alternate TFTP Field

You must enter the Alternate TFTP and TFTP server fields when you configure an off-premises phone for
SSL VPN to ASA using a built-in client.

Procedure

Step 1

Scroll to the Alternate TFTP option.

Step 2

Press

Edit

Step 3

Press

Yes

if the phone should use an alternative TFTP server.

Step 4

Press

if the phone should not use an alternative TFTP server.

Set TFTP Server 1 Field

You must enter the Alternate TFTP and TFTP server fields when you configure an off-premises phone for
SSL VPN to ASA using a built-in client.

Procedure

Step 1

If DHCP is enabled, set the Alternate TFTP option to

Yes

Step 2

Scroll to the TFTP Server 1 option, press

Select

, and enter a new TFTP server IP address.

Step 3

Press

Apply

then press

Save

Step 4

Erase the security settings.

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP

and SIP)

Configure Network Settings

Summary of Contents for Unified IP Phone 8941

















































































































































































































Search results

Summary of Contents for Unified IP Phone 8941

Reviews:

Related manuals for Unified IP Phone 8941

Brands by name

Popular brands

Cisco Unified IP Phone 8941, Administration Manual

Search results

Summary of Contents for Unified IP Phone 8941

Reviews:

Related manuals for Unified IP Phone 8941

Brands by name

Popular brands