•
Console Logs: Includes hyperlinks to individual log files. The console log files include debug and error
messages received on the phone.
•
Core Dumps: Includes hyperlinks to individual dump files. The core dump files include data from a
phone crash.
•
Status Messages: Displays up to the 10 most recent status messages that the phone has generated since
it was last powered up. You can also see this information from the Status Messages screen on the phone.
Status Messages, on page 141
describes the status messages that can appear.
•
Debug Display: Displays debug messages that might be useful to Cisco TAC if you require assistance
with troubleshooting.
•
Restart Cause: Displays the cause for the restart.
Streaming Statistics
A Cisco Unified IP Phone can stream information to and from up to three devices simultaneously. A phone
streams information when it is on a a call or running a service that sends or receives audio or data.
The streaming statistics areas on a phone web page provide information about the streams. Cisco Unified IP
Phone 8941 and 8945 use only Stream 1.
To display a Streaming Statistics area, access the web page for the phone, and then click the Stream 1 hyperlink.
The following table describes the fields in the Streaming Statistics areas.
Table 26: Streaming Statistics Fields
Description
Item
IP address and RTP port of the destination of the stream.
Remote Address
IP address and RTP port of the phone.
Local Address
Internal time stamp indicating when Cisco Unified Communications Manager
requested that the phone start transmitting packets.
Start Time
Indication of whether streaming is active or not.
Stream Status
Unique, fixed name that is automatically assigned to the phone based on its
MAC address.
Host Name
Total number of RTP data packets transmitted by the phone since starting
this connection. The value is 0 if the connection is set to receive only mode.
Sender Packets
Total number of payload octets transmitted in RTP data packets by the phone
since starting this connection. The value is 0 if the connection is set to receive
only mode.
Sender Octets
Type of audio/video encoding used for the transmitted stream.
Sender Codec
Number of times the RTCP Sender Report have been sent.
Sender Reports Sent (see
note)
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
and SIP)
159
Cisco IP Phone Web Page
