Modify Phone Button Template
Phone button templates let you assign speed dials and call-handling features to programmable line buttons.
Call-handling features that can be assigned to buttons include Call Forward, Hold, and Conference.
Procedure
Step 1
To modify a phone button template, in Cisco Unified Communications Manager Administration choose
Device
>
Device Settings
>
Phone Button Template
Step 2
To assign a phone button template to a phone, choose
Device
>
Phone
, and set up the Phone Button Template
field.
Set Up PAB or Speed Dial as IP Phone Service
To configure PAB or Speed Dial as an IP phone service (if it is not already a service), perform these steps:
Procedure
Step 1
From Cisco Unified Communications Manager Administration, choose
Device
>
Device Settings
>
Phone
Services
.
The Find and List IP Phone Services window displays.
Step 2
Click
Add New
.
The IP Phone Services Configuration window displays.
Step 3
Enter the following settings:
•
Service Name and ASCII Service Name: Enter
Personal Address Book
.
•
Service Description: Enter an optional description of the service.
•
Service URL:
For PAB, enter the following URL:
http://<Unified CM-server-name>:8080/ccmpd/login.do?name=#DEVICENAME#&service=pab
For Fast Dial, enter the following URL:
http://<Unified-CM-server-name>:8080/ccmpd/login.do?name=#DEVICENAME#&service=fd
•
Service Category: Select
XML Service
.
•
Service Type: Select
Directories
.
•
Enable: Select the check box.
Step 4
Click
Save
.
You can add, update, or delete service parameters as needed as described in the
Cisco Unified Communications
Manager Administration Guide
,
“
Cisco Unified IP Phone Services Configuration
”
chapter.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
116
Phone Button Templates
