manualshive.com logo in svg

Cisco Unified IP Phone 8941, Administration Manual

The Cisco Unified IP Phone 8941 offers a user-friendly experience combined with advanced communication features. Customize and manage this innovative phone effortlessly with the comprehensive Administration Manual, available for free download from manualshive.com. Accessible and convenient, enhance your communication experience with this reliable and feature-rich phone.

Share
Download
background image

Feature Support by Protocol

This section provides information about feature support for the Cisco Unified IP Phones 8941 and 8945 using
the SCCP or SIP protocol with Cisco Unified Communications Manager Release 9.0 or later.

The table provides a high-level overview of calling features and their support by protocol. This table focuses
primarily on end-user calling features and is not intended to represent a comprehensive listing of all available
phone features. For details about user interface differences and feature use, refer to the

Cisco Unified IP Phone

8941 and 8945 User Guide for Cisco Unified Communications Manager (SCCP and SIP)

.

The guide is available at this URL:

http://www.cisco.com/en/US/products/ps10451/tsd_products_support_series_home.html

The specific sections that describe the features in the user guide are referenced in the following table.

Table 15: Cisco Unified IP Phones 8941 and 8945 Feature Support by Protocol

For more information, see the following chapter
and section in the user guide

Protocol: SIP

Protocol: SCCP

Features

Calling Features

Calling Features, Speed Dial

Supported

Supported

Abbreviated Dialing

Calling Features, Agent Greeting

Supported

Supported

Agent Greeting

Calling Features, Call Park

Supported

Not supported

Assisted Directed
Call Park

Voice Messages, Check for voice messages

Supported

Supported

Audible Message
Waiting Indicator
(AMWI)

Calling features, Video Calls and Security

Supported

Supported

Audio Only Lock
Icon

Calling features, Auto Answer

Supported

Supported

Auto Answer

Supported

Supported

Auto-pickup

Supported

Supported

Automatic Port
Synchronization

Calling features, Video calls

Supported

Supported

Bandwidth
Management
Enhancement

Calling features, Barge

Supported

Supported

Barge

Supported

Supported

Block external to
external transfer

   Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0

(SCCP and SIP)

108

Feature Support by Protocol

Summary of Contents for Unified IP Phone 8941

















































































































































































































Reviews:

No comments

Related manuals for Unified IP Phone 8941

NEC G355 Administrator'S Manual preview
G355
Brand: NEC Pages: 36
NEC G355 Quick Reference Manual preview
G355
Brand: NEC Pages: 4
NEC G266 Reference Manual preview
G266
Brand: NEC Pages: 3
Samsung SPH-a660 Series Reference Manual preview
SPH-a660 Series
Brand: Samsung Pages: 2
Samsung SGH-S100 User Manual preview
SGH-S100
Brand: Samsung Pages: 73
Samsung SGH-E715 User Manual preview
SGH-E715
Brand: Samsung Pages: 164
Samsung SCH-a600 Series Quick Reference Card preview
SCH-a600 Series
Brand: Samsung Pages: 2
Eads Telecom ITE-12SD Quick Reference preview
ITE-12SD
Brand: Eads Telecom Pages: 2
Yealink T42 Quick Reference Manual preview
T42
Brand: Yealink Pages: 2
NAPCO StarLink SLE-LTE Commercial Series Installation Instructions Manual preview
StarLink SLE-LTE Commercial Series
Brand: NAPCO Pages: 20
SoftBank 911T User Manual preview
911T
Brand: SoftBank Pages: 392
Alcatel OneTouch X1 7053D Quick Start Manual preview
OneTouch X1 7053D
Brand: Alcatel Pages: 20
Blackberry Torch 9800 (French) Manual De Démarrage Rapide preview
Torch 9800
Brand: Blackberry Pages: 6
Linksys SPA901 User Manual preview
SPA901
Brand: Linksys Pages: 5
Alcatel 1L Pro User Manual preview
1L Pro
Brand: Alcatel Pages: 56
Planet VIP-1120PT Quick Installation Manual preview
VIP-1120PT
Brand: Planet Pages: 8
Sony Ericsson Xperia Play R800A White Paper preview
Xperia Play R800A
Brand: Sony Ericsson Pages: 19
Allview P7 Xtreme User Manual preview
P7 Xtreme
Brand: Allview Pages: 143

Brands by name

Popular brands

Load more brands