Conference
Conference allows you to talk simultaneously with multiple parties.
When you are talking on a call, use Conference to dial another party and add them to the call.
Before completing a conference procedure, you can press Cancel to cancel the procedure.
As the conference host, you can remove individual participants from the conference. You can also view a list
of participants.
The conference ends when all the participants hang up.
Add Third Party to Conference
Before you begin
Before you can add a party to the conference, you must be on an active call and not on hold.
Procedure
Step 1
Press
Conf
.
Step 2
Enter the phone number for the party you want to add.
If you have several held calls, you can press
Calls
to display a caller list and add a caller to the conference.
Step 3
After the new party answers, press
Conf
.
The conference begins.
Step 4
(Optional) Repeat these steps to add more parties, if desired.
View Conference Participants
Procedure
While in a conference, press
ConfList
to view a list of the last 16 participants who have joined the conference.
The maximum number of participants that can be displayed is 16. If there are more than 16 participants, only
the most recent 16 participants to join display.
Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager
51
Calling Features
Conference