manualshive.com logo in svg

Cisco Unified 7905G, Administrator'S Manual

The Cisco Unified 7905G offers seamless communication. To maximize your experience, it is crucial to have the Administrator's Manual. Download the comprehensive manual for free from our manualshive.com and gain valuable insights on effectively operating this powerful device.

Share
Download
background image

 

Chapter 5

Configuring the Cisco IP Phone Models 7905G and 7912G Using the Phone Menus

Configuration Menus on the Cisco IP Phone

5-4

Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)

OL-4277-01

Unlocking and Locking Configuration Parameters

Configuration parameters in the Network Configuration menu and the SIP 
Configuration menu on a phone are locked by default to prevent users from 
making changes that could affect the operation of a phone.

When parameters are inaccessible for modification, a locked padlock icon appears 
on the Network Configuration menu and the SIP Configuration menu. When 
parameters are unlocked and accessible for modification, an unlocked padlock 
icon appears on these menus, as shown below.

You must unlock the network configuration parameters or the SIP configuration 
parameters before you can configure them. If a password has been specified for 
the phone, you must enter the password when unlocking configuration 
parameters. (For more information about passwords, see the explanation of 
UIPassword in 

Table 8-6 on page 8-26

.)

Network configuration parameters and SIP configuration parameters are locked 
again automatically when you exit the Settings menu.

To unlock network configuration and SIP configuration parameters on the 
Cisco IP Phone, follow these steps:

Procedure

Step 1

Press the Menu button.

Step 2

Use the Navigation button to select Settings, and then press the Select softkey.

Step 3

Use the Navigation button to select Network Configuration or SIP 
Configuration, and then press the Select softkey.

Step 4

From the Network Configuration menu or the SIP Configuration menu, press **#.

Summary of Contents for Unified 7905G















































































































































































































































Reviews:

No comments

Related manuals for Unified 7905G

Pantech Laser Guía Del Usuario preview
Laser
Brand: Pantech Pages: 97
Pantech Laser Getting Started Manual preview
Laser
Brand: Pantech Pages: 52
Pantech Laser Quick Start Manual preview
Laser
Brand: Pantech Pages: 2
T-Mobile Dash User Manual preview
Dash
Brand: T-Mobile Pages: 174
Micromax Q66- Eclipse User Manual preview
Q66- Eclipse
Brand: Micromax Pages: 29
HTC Desire 628 Safety And Regulatory Manual preview
Desire 628
Brand: HTC Pages: 26
SMART Ultrai8513 User Manual preview
Ultrai8513
Brand: SMART Pages: 16
InFocus IN610 User Manual preview
IN610
Brand: InFocus Pages: 120
Yuxin YWH201 User Manual preview
YWH201
Brand: Yuxin Pages: 42
Audiovox CDM-8100 User Manual preview
CDM-8100
Brand: Audiovox Pages: 52
Blu DASH 4.0 User Manual preview
DASH 4.0
Brand: Blu Pages: 54
Grandstream Networks GXP1450 Quick Start Manual preview
GXP1450
Brand: Grandstream Networks Pages: 19
myPhone Funky User Manual preview
Funky
Brand: myPhone Pages: 9
Samsung SUNBURST SGH-A697 Series Manual Del Usuario preview
SUNBURST SGH-A697 Series
Brand: Samsung Pages: 185
Samsung SCH-R100 Manual Del Usuario preview
SCH-R100
Brand: Samsung Pages: 132
Samsung SCH-W780 Manual preview
SCH-W780
Brand: Samsung Pages: 22
Samsung SGH-N200 Owner'S Manual preview
SGH-N200
Brand: Samsung Pages: 71
Samsung SCH-W690 User Manual preview
SCH-W690
Brand: Samsung Pages: 25

Brands by name

Popular brands

Load more brands