3-74
Cisco UCS C240 Server Installation and Service Guide
OL-25761-01
Chapter 3 Maintaining the Server
Replacing an Internal SD Card
Enabling or Disabling the Internal USB Port
The factory default is for all USB ports on the server to be enabled. However, the internal USB port can
be enabled or disabled in the server BIOS. To enable or disable the internal USB port, follow these steps:
Step 1
Enter the BIOS Setup utility by pressing the
F2
key when prompted during bootup.
Step 2
Navigate to the
Advanced
tab.
Step 3
On the Advanced tab, select
USB Configuration
.
Step 4
On the USB Configuration page, select
USB Ports Configuration
.
Step 5
Scroll to
USB Port: Internal
, press
Enter
, and then select either Enabled or Disabled from the pop-up
menu.
Step 6
Press F10 to save and exit the utility.
