Cisco TelePresence SX20N Reference Guide
Ensure that the power cable
is
plugged into the power outlet in the
wall.
Confirm that the network cable
is
plugged into the network outlet in the
wall. The network cable must be
plugged into a dedicated OTN network
outlet.
Verify that the power bar
is turned
on. The power bar supplies the whole
system and you can turn off your system
here at the end of your session.
Ensure that the monitor is on.
Check that the codec/camera is on
by checking the LED light at the front
of the codec
Pick up the remote control
and
unmute your videoconferencing sound
by pressing the “Mic Off” button on the
remote control.
Turn the Self view on
by navigating to
the camera icon using the remote
arrows and selecting the thumb tac icon.
TECHNICAL SUPPORT 1-866-454-6861
1
2
3
4
5
6
7
