D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
96
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Time WorkWeek FirstDayOfWeek
The Time WorkWeek FirstDayOfWeek, Time WorkWeek LastDayOfWeek, Time WorkDay Start,
and Time WorkDay End settings are available so that you can specify when the regular working
hours are, and thereby also find the out-of-office hours.
Knowing the out-of-office hours is required if you want to use the power save mode, which is
set up using the Standby PowerSave setting.
Requires user role: ADMIN, USER
Default value: Monday
USAGE:
xConfiguration Time WorkWeek FirstDayOfWeek:
FirstDayOfWeek
where
FirstDayOfWeek
: Monday/Tuesday/Wednesday/Thursday/Friday/Saturday/Sunday
The first day of the working week. Example: Monday
xConfiguration Time WorkWeek LastDayOfWeek
The Time WorkWeek FirstDayOfWeek, Time WorkWeek LastDayOfWeek, Time WorkDay Start,
and Time WorkDay End settings are available so that you can specify when the regular working
hours are, and thereby also find the out-of-office hours.
Knowing the out-of-office hours is required if you want to use the power save mode, which is
set up using the Standby PowerSave setting.
Requires user role: ADMIN, USER
Default value: Friday
USAGE:
xConfiguration Time WorkWeek LastDayOfWeek:
LastDayOfWeek
where
LastDayOfWeek
: Monday/Tuesday/Wednesday/Thursday/Friday/Saturday/Sunday
The last day of the working week. Example: Friday
UserInterface configuration
xConfiguration UserInterface ContactInfo Type
Choose which type of contact information to show in the status field in the upper left corner of
the display and Touch controller.
Requires user role: ADMIN
Default value: Auto
USAGE:
xConfiguration UserInterface ContactInfo Type:
Type
where
Type
: Auto/None/IPv4/IPv6/H323Id/H320Number/E164Alias/SipUri/SystemName/
DisplayName
Auto: Show the address which another system should dial to reach this video system.
The address depends on the default call protocol and system registration.
None: Do not show any contact information.
IPv4: Show the system's IPv4 address.
IPv6: Show the system's IPv6 address.
H323Id: Show the system's H.323 ID (refer to the H323 H323Alias ID setting).
H320Number: Show the system's H.320 number as contact information (only applicable
if connected to Cisco TelePresence ISDN Link).
E164Alias: Show the system's H.323 E164 Alias as contact information (refer to the
H323 H323Alias E164 setting).
SipUri: Show the system's SIP URI (refer to the SIP URI setting).
SystemName: Show the system's name (refer to the SystemUnit Name setting).
DisplayName: Show the system's display name (refer to the SIP DisplayName setting).
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration
