manualshive.com logo in svg

Cisco TelePresence MX700, Reference Manual

The Cisco TelePresence MX700 is an advanced video conferencing solution designed for immersive collaboration. Ensure seamless installation with our comprehensive Installation Manual, available for free download at [website]. Easily access the manual to set up and optimize your TelePresence MX700, unlocking its full potential for remote communication.

Share
Download
background image

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

205

Cisco TelePresence MX700 and MX800

API Reference Guide

xStatus Network 1 CDP PrimaryMgmtAddress

Returns the management address used to configure and monitor the switch the endpoint is 

connected to.

Requires user role: ADMIN, USER

Value space of the result returned: 

String

Example:

 

xStatus Network CDP PrimaryMgmtAddress

*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"

** end

xStatus Network 1 CDP SysName

Returns the SysName as configured in the switch the endpoint is connected to.

Requires user role: ADMIN, USER

Value space of the result returned: 

String

Example:

 

xStatus Network CDP SysName

*s Network 1 CDP SysName: ""

** end

xStatus Network 1 CDP SysObjectID

Returns the SysObjectID as configured in the switch the endpoint is connected to.

Requires user role: ADMIN, USER

Value space of the result returned: 

String

Example:

 

xStatus Network CDP SysObjectID

*s Network 1 CDP SysObjectID: ""

** end

xStatus Network 1 CDP Version

Returns information about the software release version the switch is running.

Requires user role: ADMIN, USER

Value space of the result returned: 

String

Example:

 

xStatus Network 1 CDP Version

*s Network 1 CDP Version: "Cisco IOS Software, C3560CX Software (C3560CX-

UNIVERSALK9-M), Version 15.2(3)E, RELEASE SOFTWARE (fc4)*Technical Support: 

http://www.cisco.com/techsupport*Copyright (c) 1986-2014 by Cisco Systems, 

Inc.*Compiled Sun 07-Dec-14 13:15 by prod _ rel _ team"

** end

xStatus Network 1 CDP VoIPApplianceVlanID

Identifies the VLAN used for VoIP traffic from the endpoint to the switch. For more information 

see documentation of the IEEE 802.1Q protocol.

Requires user role: ADMIN, USER

Value space of the result returned: 

String

Example:

 

xStatus Network CDP VoIPApplianceVlanID

*s Network 1 CDP VoIPApplianceVlanID: "300"

** end

xStatus Network 1 CDP VTPMgmtDomain

Returns the switch’s configured VTP management domain name-string.

Requires user role: ADMIN, USER

Value space of the result returned: 

String

Example:

 

xStatus Network CDP VTPMgmtDomain

*s Network 1 CDP VTPMgmtDomain: "anyplace"

** end

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xStatus

Summary of Contents for TelePresence MX700


















































































































































































































































Reviews:

No comments

Related manuals for TelePresence MX700

Canon MX490 Series Getting Started preview
MX490 Series
Brand: Canon Pages: 4
Canon IXUS 125 HS User Manual preview
IXUS 125 HS
Brand: Canon Pages: 220
Canon PowerShot A3200 IS User Manual preview
PowerShot A3200 IS
Brand: Canon Pages: 98
Canon PowerShot A1400 User Manual preview
PowerShot A1400
Brand: Canon Pages: 124
Canon IXUS 265 HS Getting Started preview
IXUS 265 HS
Brand: Canon Pages: 231
Canon PowerShot A100 Quick Start Manual preview
PowerShot A100
Brand: Canon Pages: 2
Canon IXUS V3 Software Starter Manual preview
IXUS V3
Brand: Canon Pages: 123
Canon EOS-1D Mark II Digial Settings Manual preview
EOS-1D Mark II Digial
Brand: Canon Pages: 148
Dalsa Spyder3 GigE User Manual preview
Spyder3 GigE
Brand: Dalsa Pages: 111
Olympus D630 - CAMEDIA D 630 Zoom Digital Camera Advanced Manual preview
D630 - CAMEDIA D 630 Zoom Digital Camera
Brand: Olympus Pages: 134
Virax Micro Visioval 294200 User Manual preview
Micro Visioval 294200
Brand: Virax Pages: 36
Olympus CAMEDIA D-425 Quick Start Manual preview
CAMEDIA D-425
Brand: Olympus Pages: 2
OM SYSTEM OM-5 Instruction Manual preview
OM-5
Brand: OM SYSTEM Pages: 467
Concord Camera 5345z User Manual preview
5345z
Brand: Concord Camera Pages: 61
Oaxis myFirst Camera 3 User Manual preview
myFirst Camera 3
Brand: Oaxis Pages: 4
Basler Vision Technologies Basler scout scA640-70gc User Manual preview
Basler scout scA640-70gc
Brand: Basler Vision Technologies Pages: 20
FujiFilm F480/F485 Owner'S Manual preview
F480/F485
Brand: FujiFilm Pages: 134
Connects2 Vision CAM-VW11 Quick Start Manual preview
Vision CAM-VW11
Brand: Connects2 Pages: 4

Brands by name

Popular brands

Load more brands