D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
147
Cisco TelePresence MX700 and MX800
API Reference Guide
RoomPreset commands
xCommand RoomPreset Activate
Activate one of the locally stored presets.
Note that information about all video input sources, and pan, tilt, zoom and focus values for
all cameras are included in the same preset. In contrast, the xCommand Camera Preset
commands applies to individual cameras only.
Requires user role: ADMIN, USER
USAGE:
xCommand RoomPreset Activate PresetId:
PresetId
where
PresetId:
Integer (1..15)
The ID of the preset you want to activate.
xCommand RoomPreset Clear
Delete a preset.
Note that information about all video input sources, and pan, tilt, zoom and focus values for
all cameras are included in the same preset. In contrast, the xCommand Camera Preset
commands applies to individual cameras only.
Requires user role: ADMIN, USER
USAGE:
xCommand RoomPreset Clear PresetId:
PresetId
where
PresetId:
Integer (1..15)
The ID of the preset you want to delete.
xCommand RoomPreset Store
Store the connector selections for all video input sources and the current position (pan and tilt),
zoom and focus values for all cameras.
Note that information about all video input sources, and pan, tilt, zoom and focus values for
all cameras are included in the same preset. The system may hold 15 such predefined video
input presets. These presets are available for far end control, i.e. they are referred in the
PresetId parameter of the xCommand FarEndControl Preset Activate command. In contrast, the
xCommand Camera Preset commands applies to individual cameras only. Those presets are
not available for far end control.
Requires user role: ADMIN, USER
USAGE:
xCommand RoomPreset Store [Description: "
Description
"] PresetId:
PresetId
Type:
Type
where
Description:
String (0, 255)
Enter a description of the camera preset.
PresetId:
Integer (1..15)
The ID of this preset.
Type:
All/Camera
Not applicable. If you want to ensure that a preset only affects camera positions we
recommend that you select Camera.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand
