Cisco
TelePresence
ISDN
Link
Administrator
Guide
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
82
Connecting the cables
Connect the cables as described in steps A to D.
CAutIoN:
Always use the AC-DC adapter shipped with the product.
1. Select
one
of the three options for the ISDN
line connection:
A.
Connect the ISDN cable(s) between the
ISDN BRI port(s) and the ISDN line(s),
B.
or, connect the ISDN cable between
the ISDN PRI port and the ISDN line,
C.
or, connect the V.35 cable between the
Net port and the external network line.
2. For system configuration, connect a
Category 5e ethernet cable between the
ethernet port on the ISDN Link and the LAN
network.
3. Connect a Category 5e ethernet cable
between the endpoint port on the ISDN Link
and the ethernet port on the endpoint.
4. Connect the supplied power adapter
between the power connector and an
electrical outlet.
CAutIoN:
Always use the AC-DC adapter
shipped with the product.
1A
2
3
4
1B
1C
Contents
Introduction
Getting started
Software upgrade
Status information
System settings
Appendices
Appendices
