D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
45
Cisco TelePresence DX70 and DX80
API Reference Guide
xConfiguration Conference AutoAnswer Delay
Define how long (in seconds) an incoming call has to wait before it is answered automatically by
the system. Requires that AutoAnswer Mode is switched on.
Requires user role: ADMIN
Default value: 0
USAGE:
xConfiguration Conference AutoAnswer Delay:
Delay
where
Delay
: Integer (0..50)
The auto answer delay (seconds).
xConfiguration Conference DefaultCall Protocol
Define the Default Call Protocol to be used when placing calls from the system.
Requires user role: ADMIN
Default value: Auto
USAGE:
xConfiguration Conference DefaultCall Protocol:
Protocol
where
Protocol
: Auto/H320/H323/Sip/Spark
Auto: Enables auto-selection of the call protocol based on which protocols are available.
If multiple protocols are available, the order of priority is: 1) SIP; 2) H323. If the system
cannot register, the auto-selection chooses H323.
H320: Not supported.
H323: All calls are set up as H.323 calls.
Sip: All calls are set up as SIP calls.
Spark: Reserved for Spark registered systems. Do not use.
xConfiguration Conference DefaultCall Rate
Define the Default Call Rate to be used when placing calls from the system.
Requires user role: ADMIN, INTEGRATOR
Default value: 3072
USAGE:
xConfiguration Conference DefaultCall Rate:
Rate
where
Rate
: Integer (64..3072)
The default call rate (kbps).
xConfiguration Conference DoNotDisturb DefaultTimeout
This setting determines the default duration of a Do Not Disturb session, i.e. the period when
incoming calls are rejected and registered as missed calls. The session can be terminated
earlier by using the user interface. The default value is 60 minutes.
Requires user role: ADMIN, INTEGRATOR
Default value: 60
USAGE:
xConfiguration Conference DoNotDisturb DefaultTimeout:
DefaultTimeout
where
DefaultTimeout
: Integer (1..1440)
The number of minutes (maximum 1440 minutes = 24 hours) before the Do Not Disturb
session times out automatically.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration
