MENu ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODuCT
Control Panel >
Buttons >
Diagnostics >
WARNINGS
ISDN-PRI WARNINGS
•
ISDN-PRI is configured for this system, but the line is not connected. Please check your network
connection or disable the network. (131)
•
There is something wrong with the ISDN-PRI line (Blue alarm). Please check your network connection.
(132)
•
There is something wrong with the ISDN-PRI line (Yellow alarm). Please check your network connection.
(133)
•
There is something wrong with the ISDN-PRI line (D-Channel not active). Please check your network
connection. (134)
Any warnings registered by the system will be displayed in
the Warnings menu in the bottom of the screen. Go to the
Diagnostics menu and open a warning in the list to get more
information about the warning.
All with
ISDN-PRI
Control Panel >
Buttons >
Diagnostics >
WARNINGS
EXTERNAL NETWORk WARNINGS
•
External Network is configured for this system, but the line is not connected. Please check your network
connection or disable the network. (161)
Any warnings registered by the system will be displayed in
the Warnings menu in the bottom of the screen. Go to the
Diagnostics menu and open a warning in the list to get more
information about the warning.
All with
External
Network
Control Panel >
Buttons >
Diagnostics >
WARNINGS
LEASED E1/T1 WARNINGS
•
Leased E1/T1 is configured for this system, but the line is not connected. Please check your network
connection or disable the network. (191)
•
There is something wrong with the Leased E1/T1 line (Blue alarm). Please check your network
connection. (192)
•
There is something wrong with the Leased E1/T1 line (Yellow alarm). Please check your network
connection. (193)
Any warnings registered by the system will be displayed in
the Warnings menu in the bottom of the screen. Go to the
Diagnostics menu and open a warning in the list to get more
information about the warning.
All with
Leased
E1/T1
Control Panel >
Buttons >
AUDIO DEMO
AuDIO DEMO
Cisco systems are designed to improve audio quality during a video conference – as if the person is in
the same room!
Demonstrate the high quality Audio of your system by pressing the Audio Demo button at the Control
Panel Menu.
All
Control Panel >
Buttons >
RESTART
RESTART THE SySTEM
You will find the Restart button at the bottom of the Control Panel menu. Select the Restart button and
press OK on the remote control.
You are prompted with a dialog box saying:
Do you want to restart?
Ok:
Press OK to restart the system.
CANCEL:
Press Cancel (X) to abort the restart.
Some Control Panel Settings require a restart of the system
to put changes into effect. In these cases you will find a
Save
& Restart
button in the respective menus.
Example: Both IP Settings and SIP settings in the Network
menu requires restart of the system to put changes into
effect.
All
92
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
The settings library
