manualshive.com logo in svg

Cisco TelePresence 1000 MXP, Administrator'S Manual

Share
Download
Cisco TelePresence 1000 MXP Administrator'S Manual Download Page 78

MENu ADDRESS

SETTINGS DESCRIPTION

INFORMATION

PRODuCT

Control Panel >
Network >
LAN Settings >

SIP SETTINGS

SIP ADDRESS (uRI)

The SIP URI or number is used to address the video system. This is the same URI that is registered 

and used by the SIP services to route inbound calls to the video system. An URI is a compact string of 

characters used to identify or name a resource.
Example: 

“sip:[email protected]”, “1234”, “[email protected]”

URI - Uniform Resource Identifier

All

Control Panel >
Network >
LAN Settings >
SIP Settings

SIP SERVER SETTINGS

SERVER DISCOVERy

The SIP Server helps the video system to route calls to the destination. It can also authenticate, 

authorize services for the video system.

AuTO: 

The SIP Server address is retrieved from the DHCP service, if available.

MANuAL: 

The manually configured SIP Server address will be used.

DHCP - Dynamic Host Configuration Protocol

All

Control Panel >
Network >
LAN Settings >
SIP Settings

SIP SERVER SETTINGS

SERVER ADDRESS

The SIP Address is the manually configured outbound proxy for the signaling.  It may also be the 

registrar, or it will route the registrations to the registrar. It is possible to use a fully qualified domain 

name, or an IP address. The default port is 5060 for TCP and UDP, but another one can be provided.
Examples: “

sipserver.example.com

”, “

sipserver.example.com:5060

”, “

10.0.0.2

”, “

10.0.0.2:5061

”

All

Control Panel >
Network >
LAN Settings >
SIP Settings

SIP SERVER SETTINGS

SERVER TyPE

Select the SIP Server type.

AuTO: 

Should be used when registering to standard SIP servers like OpenSer.

NORTEL: 

Must be used when registering to a Nortel MCS 5100 or MCS 5200 PBX.

MICROSOFT: 

Must be used when registering to a Microsoft LCS or OCS server.

CISCO: 

Must be used when registering to a Cisco CallManager version 5 or later.

ALCATEL: 

Must be used when registering to a Alcatel-Lucent OmniPCX Enterprise R7 or later.

SIEMENS: 

Must be used when registering to a Siemens HiPath 8000.

TELIO: 

Must be used in combination with a Telio subscription (www.telio.no).

EXPERIMENTAL: 

Can be used if auto is not working 

NOTE!

 This mode is for testing purposes only.

All

Control Panel >
Network >
LAN Settings >
SIP Settings

SIP SERVER SETTINGS

TRANSPORT

Select the transport protocol to be used over the LAN.

AuTO: 

The system will try to connect using transport protocols in the following order: TLS, TCP, UDP.

TCP: 

The system will always use TCP as the default transport method.

uDP: 

The system will always use UDP as the default transport method.

TLS: 

The system will always use TLS as the default transport method. For TLS connections a SIP 

CA-list can be uploaded using the web interface. If no such CA-list is available on the system then 

anonymous Diffie Hellman will be used.

TCP - Transmission Control Protocol
UDP - User Datagram Protocol
TLS - Transport Layer Security
SIP CA List - SIP Proxy CA List (PEM format)

All

78

Cisco TelePresence MXP Series

Administrator guide

D14791.01 MXP Series Administrator Guide F90, August

 2011.  

Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.

www.cisco.com

Contents

Contact us

Introduction

The menu structure

The settings library

Getting started

Appendices

The settings library

Summary of Contents for TelePresence 1000 MXP













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands