Open the Control Panel
Press the
OK
key on the remote control to wake up the
system, and to display the
Call menu
.
In the Call menu, use the arrow keys on the
remote control to navigate to the
Control Panel
button
and press the
OK
key to display the
Control Panel.
Each menu item is described in
section.
Back
Restart
(the system switches itself Off and On again)
Audio Demo
(demonstrates the audio of the system)
Diagnostics
(see the system status and warnings))
On-line User Guide
(open the online user guide).
Remote control shortcut keys
About the Control Panel
The different parts of the Control Panel are explained on the
following pages.
Password Protection
Making changes to the Control Panel Settings will change the
behavior of the system. We recommend password protecting
the access to the Control Panel Settings to prevent
occasional users from making crucial changes to the system.
Set an Administrator Password to control the access to these
settings.
Re-dial
: Double click on the green call button
on the remote control to start calling the last
number.
Standby
: Double click on the red end call
button on the remote control to set the system
into standby.
Show system information
: Open the call menu
and press the arrow up key once to show the
System information page.
Reset menu language
: Click on the Phone
Book button 5 times and then press the
number key 1 to reset the menu language to
English.
16
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
The menu structure
