Management ACL Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
820
39
switchxxxxxx(config-macl)#
permit
switchxxxxxx(config-macl)#
exit
switchxxxxxx(config)#
39.4 management access-class
To restrict management connections by defining the active management access
list (ACL), use the management access-class Global Configuration mode
command. To disable management connection restrictions, use the no form of this
command.
Syntax
management access-class {console-only |
name
}
no management access-class
Parameters
•
console-only—Specifies that the device can be managed only from the
console.
•
name—Specifies the ACL name to be used. (Length: 1–32 characters)
Default Configuration
The default configuration is no management connection restrictions.
Command Mode
Global Configuration mode
Example
The following example defines an access list called mlist as the active
management access list.
switchxxxxxx(config)#
management access-class
mlist
Summary of Contents for Sx350
Page 1: ...Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide CLI GUIDE ...
Page 26: ...25 Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide 1 ...
Page 237: ...CDP Commands Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide 236 8 ...
Page 975: ...RADIUS Commands Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide 974 48 ...
