manualshive.com logo in svg

Cisco Sx350, Cli Manual

Share
Download
Cisco Sx350 Cli Manual Download Page 1043

54

Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide

1042

 

RSA and Certificate Commands

54.0

Keys and Certificates

The device automatically generates default RSA/DSA keys and certificates at 
following times: 

•

 When the device is booted following a software upgrade.

•

When the device is booted with an empty configuration.

•

When user-defined keys/certificates are deleted.

Some commands in this section are used to generate user-defined RSA/DSA 
keys and certificates that replace the default keys and are used by SSL and SSH 
server commands. Other commands can be used to import these keys from an 
external source.

These keys and certificates are stored in the configuration files. 

The following table describes when these keys/certificates are displayed..

File Type Being 
Displayed

What is Displayed in a 
Show Command 
Without Detailed

What is Displayed in a  
Show Command With 
Detailed

Startup Config

Only user-defined 
keys/certificates.

Option is not supported.

Running Config

Keys are not displayed.

All keys (default and 
user-defined)

Text-based CLI (local 
backup config. file, or 
remote backup config. 
file)

Keys are displayed as 
they were copied. There 
is no distinction here 
between default and 
user-defined keys.

Option is not supported.

Summary of Contents for Sx350












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands