Route Map Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
1040
53
Example
In the following example sets IPv76 address
3003:17ac::20
as the next hop IPv6 address:
switchxxxxxx(config)#
route-map pbr
switchxxxxxx(config-route-map)#
match ipv6 address access-list acl1
switchxxxxxx(config-route-map)#
set ipv6 next-hop 3003:17ac::20
switchxxxxxx(config-route-map)#
exit
switchxxxxxx(config-ip-al)#
exit
53.6 show route-map
To display route maps, use the show route-map command in Privileged EXEC
mode.
Syntax
show route-map [
map-name
]
Parameters
•
map-name
—Name of a specific route map.
Default Configuration
Command Mode
Privileged EXEC mode
User Guidelines
Use the show route-map
map-name
command, to display one given route map.
Use the show route-map command, to display all configured route maps.
Example
The following is sample output from the show route-map command:
switchxxxxxx#
show route-map
Summary of Contents for Sx350
Page 1: ...Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide CLI GUIDE ...
Page 26: ...25 Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide 1 ...
Page 237: ...CDP Commands Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide 236 8 ...
Page 975: ...RADIUS Commands Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide 974 48 ...
