Table 17. Global SV-4K Settings—PTP Properties
Property
(Registry Key)
Description
Values
PTP domain
(Globaldmpsetting.sv4k.init.ptp.
domain)
Domain number
for the SV-4K PTP
network, which
defines the
multicast address
for PTP
communication.
The value must be
a valid domain
number per IEEE
1588-2008 and
correspond to your
network
PTP configuration.
For IEEE-1588 PTP, possible values
are:
0—(Default) 224.0.1.129
1—224.0.1.130
2—224.0.1.131
3—224.0.1.132
PTP is disabled when the property is
unset (blank).
PTP master candidates
(Globaldmpsetting.sv4k.init.ptp.
master.host)
Note:
In a multi-
venue scenario, or
multi-VLAN scenario,
where PTP multicast
traffic does not cross
venues, designate
PTP master(s) in
each venue or VLAN,
or use the default "*"
configuration.
Eligible SV-4K
devices for master
candidate
selection.
Possible values are:
l
*—(Default). Wildcard pattern
that specifies all SV-4K devices
in the network as eligible PTP
master candidates.
l
Semicolon-separated IPv4
addresses of SV-4K devices for
each subnet.
l
blank—Specifies that a
PTP master source external to
Cisco StadiumVision Director is
used. This configuration is only
valid for a venue without SV-4K
devices in multiple subnets.
Verifying PTP Operation for the SV-4K Media Player
This section describes how to verify the PTP configuration and also the operation of
PTP for your SV-4K devices.
To verify the PTP operation for the SV-4K media player, complete the following
steps:
1. Open your browser and navigate to one of the DMPs:
http://
sv4k-ip-address
/ptp.html
© Cisco Systems, Inc. All rights reserved.
39 of 68
