manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 656

Link Layer Discovery Protocol (LLDP) Commands

78-20269-01 Command Line Interface Reference Guide

658

44

 

Example

The following example sets the LLDP packet handling mode to Flooding when 
LLDP is globally disabled.

Console(config)# 

lldp lldpdu flooding

44.13 lldp med 

Use the lldp med Interface Configuration (Ethernet) mode command to enable or 
disable LLDP Media Endpoint Discovery (MED) on a port. Use the no form of this 
command to return to the default state.

Syntax

lldp med {

enable

 [

tlv

 … 

tlv4

] | 

disable

}

no lldp med

Parameters

enable - Enable LLDP MED

tlv—Specifies the TLV that should be included. Available TLVs are: network-policy, 
location, and poe-pse, inventory. The capabilities TLV is always included if 
LLDP-MED is enabled.

disable - disable LLDP MED on the port

Default Configuration

Enabled with network-policy TLV

Command Mode 

Interface Configuration (Ethernet) mode

Example

The following example enables LLDP MED with the location TLV on 

gi

3.

Console(config)# 

interface 

gi3

Console(config-if)# 

lldp med enable 

location

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands