manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 629

Smartport Commands

78-20269-01 Command Line Interface Reference Guide

631

43

 

Parameters

N/A

Default Configuration 

Enabled.

Command Mode 

Interface Configuration mode (Ethernet Interface, Port Channel)

User Guidelines 

This command is effective only when Auto Smartport is globally enabled.

Example 

Enables the Auto Smartport feature on port 1:

console(conf)(conf)#

interface

 gi1

console(conf-if)# 

macro auto smartport

43.3

macro auto trunk refresh

The macro auto trunk refresh Global Configuration command reapplies the 
Smartport macro on a specific interface, or to all the interfaces with the specified 
Smartport type. 

Syntax

macro auto trunk refresh [

smartport-type

] [

interface-id

]

Parameters

•

smartport-type—Smartport type (switch, router, wireless access point (ap))

•

interface-id—Interface Identifier (port or port channel).

Default Configuration 

See User Guidelines.

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands