manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 607

Quality of Service (QoS) Commands

78-20269-01 Command Line Interface Reference Guide

609

41

 

41.49 security-suite deny fragmented

Use the security-suite deny fragmented Interface Configuration (Ethernet, 
Port-channel) mode command to discard IP fragmented packets from a specific 
interface. 

Use the no form of this command to permit IP fragmented packets.

Syntax

security-suite deny fragmented 

{[add {ip-address | any} {mask | /prefix-length}] | 

[remove {ip-address | any} {mask | /prefix-length}]}

no security-suite deny fragmented

Parameters

•

ip-address | any—Specifies the destination IP address. Use any to specify 
all IP addresses.

•

mask—Specifies the network mask of the IP address.

•

prefix-length—Specifies the number of bits that comprise the IP address 
prefix. The prefix length must be preceded by a forward slash (/).

Default Configuration

Fragmented packets are allowed from all interfaces.

If mask is unspecified, the default is 255.255.255.255.

If prefix-length is unspecified, the default is 32.

Command Mode

Interface Configuration (Ethernet, Port-channel) mode

User Guidelines

For this command to work, 

security-suite enable

 must be enabled both globally 

and for interfaces.

Example

The following example attempts to discard IP fragmented packets from an 
interface.

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands