manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 590

Quality of Service (QoS) Commands

78-20269-01 Command Line Interface Reference Guide

592

41

 

41.34 qos cos

Use the qos cos Interface Configuration (Ethernet, Port-channel) mode command 
to define the default CoS value of a port. Use the no form of this command to 
restore the default configuration.

Syntax

qos cos 

default-cos

no qos cos

Parameters

default-cos—Specifies the default CoS value (VPT value) of the port. If the port is 
trusted and the packet is untagged, then the default CoS value become the CoS 
value. (Range: 0–16)

Default Configuration

The default CoS value of a port is 0.

Command Mode

Interface Configuration (Ethernet, Port-channel) mode

User Guidelines

Use the default CoS value to assign a CoS value to all untagged packets entering 
the interface. 

Example

The following example defines the port 

gi

5 default CoS value as 3 .

Console(config)# 

interface 

gi

5 

Console(config-if)# 

qos cos

 3

41.35 qos dscp-mutation

Use the qos dscp-mutation Global Configuration mode command to apply the 
DSCP Mutation map to system DSCP trusted ports. Use the no form of this 
command to restore the trusted port with no DSCP mutation.

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands