manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 586

Quality of Service (QoS) Commands

78-20269-01 Command Line Interface Reference Guide

588

41

 

Parameters

•

dscp- list—Specifies up to 8 DSCP values, separated by spaces. (Range: 
0–63)

•

dscp-mark-down—Specifies the DSCP value to mark down. (Range: 0–63)

Default Configuration

The default map is the Null map, which means that each incoming DSCP value is 
mapped to the same DSCP value.

Command Mode

Global Configuration mode.

User Guidelines

The original DSCP value and policed-DSCP value must be mapped to the same 
queue in order to prevent reordering.

Example

The following example marks incoming DSCP value 3 as DSCP value 5 on the 
policed-DSCP map.

Console(config)# 

qos map policed-dscp

 3 

to

 5

41.30 qos map dscp-queue

Use the qos map dscp-queue Global Configuration mode command to configure 
the DSCP to CoS map. Use the no form of this command to restore the default 
configuration.

Syntax

qos map dscp-queue 

dscp-list

 to 

queue-id

no qos map dscp-queue [

dscp-list

]

Parameters

•

dscp-list—Specifies up to 8 DSCP values, separated by spaces. (Range: 0– 
63)

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands