manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 570

Quality of Service (QoS) Commands

78-20269-01 Command Line Interface Reference Guide

572

41

 

Command Mode

Global Configuration mode

User Guidelines

This command only exists when the device is in Layer 2.

Define an aggregate policer if the policer aggregates traffic from multiple class 
maps.

Aggregate policers cannot aggregate traffic from multiple devices. If the 
aggregate policer is applied to more than one device, the traffic on each device is 
counted separately and is limited per device.

Traffic from two different ports on the same device can be aggregated for policing 
purposes.

An aggregate policer can be applied to multiple classes in the same policy map. 

An aggregate policer cannot be deleted if it is being used in a policy map. The no 
police aggregate Policy-map Class Configuration mode command must first be 
used to delete the aggregate policer from all policy maps before using the no mls 
qos aggregate-policer command.

Policing uses a token bucket algorithm. CIR represents the speed with which the 
token is added to the bucket. CBS represents the depth of the bucket.

Example

The following example defines the parameters of a policer called Policer1 that can 
be applied to multiple classes in the same policy map. When the average traffic 
rate exceeds 124,000 kbps or the normal burst size exceeds 9600 bytes, the 
packet is dropped.

Console(config)# 

qos aggregate-policer

 policer1 124000 9600 

exceed-action 

drop

41.15 show qos aggregate-policer

Use the show qos aggregate-policer EXEC mode command to display aggregate 
policers

This command is only available in QoS advanced mode.

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands